Heavy duty Prestretched 12 strand braided uhmwpe rope for ship mooring

Heavy duty Prestretched 12 strand braided uhmwpe rope for ship mooring

What does UHMWPE stand for?

 

 

UHMWPE stands for ultra high molecular weight polyethylene. You may also hear it referred to as HMPE, or by brand names such as Spectra, Dyneema or Stealth Fibre. UHMWPE is used in high-performance lines across a variety of industries, including marine, commercial fishing, mountaineering, and aquaculture. It has many qualities that make it an excellent choice for wet environments; it is light enough to float, is hydrophobic (repels water) and stays tough at low temperatures. You will also find it used in yachting, particularly with sails and rigging, as its low stretchability lets the sails maintain an optimal shape while still being exceptionally resistant to abrasion.With its high strength to weight ratio, smooth handling and low stretch properties, it is the rope of choice for ship assist lines, offshore rigs and tankers. It is especially popular for manoeuvring vessels in distress situations.

 

What are the technical specifications of UHMWPE?


UHMWPE is a polyolefin fibre, consisting of extremely long chains of overlapping polyethylene, aligned in the same direction, which makes it one of the strongest rope options available.
Thanks to its molecular structure, UHMWPE is resistant to most chemicals, including detergents, mineral acids and oils. It can, however, be corroded by strong oxidising agents.The HMPE fibres have a density of only 0.97 g cm−3 and have a coefficient of friction that is lower than nylon and acetal. Its coefficient is similar to that of polytetrafluoroethylene (Teflon or PTFE), but it has much better abrasion resistance.

The fibres that makeup Ultra High Molecular Weight Polyethylene have a melting point of between 144°C and 152°C, which is lower than many other polymer fibres, but they have no brittle point when tested at an extremely low temperature (-150°C). Most ropes will not be able to maintain their performance in temperatures below -50°C. UHMWPE rope is therefore recommended for use between -150 and +70 °C, as it will not lose any of the high molecular weight properties in this range.
UHMWPE is actually classed as a speciality engineering plastic, used for many other functions beyond rope manufacturing. In fact, medical-grade UHMWPE has been used in joint implants for many years, particularly in knee and hip replacements. This is due to its low friction, toughness, high impact strength, resistance to corrosive chemicals and excellent biocompatibility.


You may be surprised to know that UHMW plastic is also a popular choice for body armour by the military and police, again due to its high resistance and low weight.

In addition to its impressive strength qualities, UHMWPE is tasteless, non-toxic and odourless, which is why this plastic can often be used in food production plants and manufacturing. It is safe for both end-users and production workers.

What are the properties of UHMWPE?

The superior properties of UHMWPE include: High melting point (over 144°C) Low density – floats on sea water Low weight Safer than wire – breaks in a linear fashion High performance Low moisture absorption (repels water) Chemical resistant (excluding oxidising acids) High strength – stronger than hardened steel UV resistance – prolonging the life of your rope Self-lubricating – low coefficient of friction Superior abrasion resistance Ultra-low stretch (3–4% at breaking load) Reduced cost in comparison to steel rope Low dielectric constant – almost transparent to radar Vibration damping Low maintenance Low electrical conductivity Excellent flex fatigue These high-performance ropes are increasingly being used to replace steel and conventional fibres. They are significantly stronger than steel yet only 1/8th of the weight of comparable steel wires. In other words, they are at least 8 times stronger than steel wire ropes. Ultra high molecular weight polyethylene (UHMWPE) lines are thinner, lighter and self-lubricating, so significantly more practical to handle than conventional steel ropes. In addition to their strength, they are also much safer, with less recoil force than a steel rope. When a steel rope breaks, the metal wire unravels quickly, leaving razor-sharp edges whipping around unpredictably. When a UHMWPE rope breaks, the recoil is much less. Thanks to its construction of long chains of polyethene aligned in the same direction, if it breaks (which is unlikely due to its bond strength), the rope will display a linear, predictable recoil. The self-lubricating fibres of UHMWPE also tend to have a waxy handle and smooth surface, making them easy to handle, although this means it does not hold knots particularly well. Yet despite their smoothness, they are still at least 15 times more resistant to abrasion than carbon steel. Lastly, in comparison to steel rope or other polyester ropes, UHMWPE ropes are smaller in volume due to the smaller quantities needed to achieve the same outcome. This makes them easier to store.
Item:
12-strand UHMWPE rope
Material:
UHMWPE
Type:
braided
Structure:
12-strand
Length:
220m/220m/customized
Color: 
white/black/green/blue/yellow/customized
Package:
Coil/reel/hanks/bundles
Delivery time:
7-25days

Products show

Heavy duty Prestretched 12 strand braided uhmwpe rope for ship mooring

Company Profile

Heavy duty Prestretched 12 strand braided uhmwpe rope for ship mooring

 

Qingdao Florescence Co.,Ltd is a professional manufacturer of ropes certified by ISO9001.We have built production bases in Shandong and Jiangsu of China to provide professional service of ropes for customers in different types.We have domestic first-class production equipment and excellent technicans
Main products are Polypropylene rope(PP), Polyethylene rope(PE),Polyester rope(PET), Polyamide rope(Nylon), UHMWPE rope,Sisal rope(manila), Kevlar rope (Aramid) and so on.Diameter from 4mm-160mm.Structure:3, 4, 6, 8, 12, double braided etc.

Packing & Delivery


Post time: Feb-09-2023