Thapo e Lohiloeng ea 6mm/8mm Polyester E Nang le 'Mala o Ikemetseng

6mm/8mm Polyester e Tiileng Ropo e Lohiloeng Ka 'Mala o Ikemetseng oa Sets'oants'o

Tlhaloso e Khutšoanyane:

Polyester ke e 'ngoe ea lithapo tse tsebahalang haholo indastering ea liketsoana. E haufi haholo le nylon ka matla empa e otloloha hanyane haholo, ka hona, le eona ha e khone ho monya meroalo e tšosang. E hanela ka mokhoa o ts'oanang joalo ka nylon mongobo le lik'hemik'hale, empa e phahametse ho hanyetsa mahlaba le khanya ea letsatsi. E loketse bakeng sa ho hokela, ho cheka le tšebeliso ea limela tsa indasteri, e sebelisoa e le letlooa la litlhapi le thapo ea bolt, letjeketjane la thapo le haufi le sehatsetsi se hulang.

Re romelle lengolo-tsoibila Khoasolla joalo ka PDF

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Thapo e Lohiloeng ea 6mm/8mm Polyester E Nang le 'Mala o Ikemetseng

Tlhaloso ea Sehlahisoa

Papiso ea thepa ea thapo e 3

Lintho tse bonahalang	PolyamideMultifilament	PolypropyleneMultifilament	Polypropylene	Polyester
Spec.Density	1.14e sa phaphametseng	0.91phaphametseng	0.91Ha e phaphametse	1.27E sa phaphametseng
Melting Point	215 ℃	165 ℃	165 ℃	260 ℃
Abrasion Resistance	Hantle haholo	Mahareng	Mahareng	E ntle
Khanyetso ea UV	Hantle haholo	Mahareng	Mahareng	E ntle
Ho hanyetsa Mocheso	120℃max	70℃max	70℃max	120℃max
Khanyetso ea Lik'hemik'hale	Hantle haholo	E ntle	E ntle	E ntle

8 thapo thapo papiso ea thepa

Lintho tse bonahalang	PolyamideMultifilament	PolypropyleneMultifilament	Polypropylene	Polyester	PP lePET e tsoakiloeng
Spec.Density	1.14e sa phaphametseng	0.91phaphametseng	0.91E sa phaphametseng	1.27E sa phaphametseng	0.95 e phaphametseng
Melting Point	215 ℃	165 ℃	165 ℃	260 ℃	165/260 ℃
Abrasion Resistance	Hantle haholo	Mahareng	Mahareng	E ntle	E ntle
Khanyetso ea UV	Hantle haholo	Mahareng	Mahareng	E ntle	E ntle
Ho hanyetsa Mocheso	120℃max	70℃max	70℃max	120℃max	80℃max
Khanyetso ea Lik'hemik'hale	Hantle haholo	E ntle	E ntle	E ntle	E ntle

12 thapo thapo papiso ea thepa

Lintho tse bonahalang	PolyamideMultifilament	PolypropyleneMultifilament	Polyester	PP le PET li tsoakane
Spec.Density	1.14e sa phaphametseng	0.91phaphametseng	1.27E sa phaphametseng	0.95 e phaphametseng
Melting Point	215 ℃	165 ℃	260 ℃	165/260 ℃
Abrasion Resistance	Hantle haholo	Mahareng	E ntle	E ntle
Khanyetso ea UV	Hantle haholo	Mahareng	E ntle	E ntle
Ho hanyetsa Mocheso	120℃max	70℃max	120℃max	80℃max
Khanyetso ea Lik'hemik'hale	Hantle haholo	E ntle	E ntle	E ntle

Thapo e Lohiloeng ea 6mm/8mm Polyester E Nang le 'Mala o Ikemetseng

Litšoantšo tsa lihlahisoa

Rope e Akaretsang e tiileng e Lokiloeng Kakaretso ea 12mm Bakeng sa Lebenkele la Hardware

Phallo e sebetsang

Qotsulo:

Re tla fana ka khotheishene khahlanong le ho fumana lintlha tse qaqileng tsa moreki, joalo ka thepa, boholo, 'mala, moralo, bongata joalo-joalo.

Mokhoa oa ho etsa mohlala:

Potso ea bareki → Khoutu ea moreki → Moreki a amohela khotheishene → Lintlha tse netefatsang Moreki → Moreki o romela PO ho mofani oa thepa bakeng sa lisampole →Mofani o romela konteraka ea thekiso ho moreki → tefiso ea ho lefshoa ke moreki → mofani oa thepa qala ho etsa sampole → Mehlala e se e lokile ebile e rometsoe

Mokhoa oa ho odara:

Mohlala o lumelletsoe ho amohela thepa

Rope e Akaretsang e tiileng e Lokiloeng Kakaretso ea 12mm Bakeng sa Lebenkele la Hardware

Boleng bo Phahameng 10mm Mebala e tiileng ea Polyester Rope e Chesang e Chesang

Mekhoa ea ho romella

LBH

Rope e Akaretsang e tiileng e Lokiloeng Kakaretso ea 12mm Bakeng sa Lebenkele la Hardware

1. Ke lokela ho khetha sehlahisoa sa ka joang?

A: U hloka feela ho re bolella ts'ebeliso ea lihlahisoa tsa hau, re ka khothaletsa thapo kapa marang-rang a loketseng ho latela tlhaloso ea hau. Mohlala, Haeba lihlahisoa tsa hau li sebelisetsoa indasteri ea lisebelisoa tsa kantle, u ka hloka tepo kapa thapo e sebetsoang ka mokhoa o sa keneleng metsi, anti UV, jj.

2. Haeba ke thahasella tepo ea hau kapa thapo, na nka fumana sampole pele ho taelo? na ke hloka ho e lefa?

A: Re ka rata ho fana ka sampole e nyane mahala, empa moreki o tlameha ho lefa litšenyehelo tsa ho tsamaisa thepa.

3. Ke lintlha life tseo ke lokelang ho fana ka tsona ha ke batla ho fumana khotheishene e qaqileng?

A: Tlhahisoleseding ea mantlha: thepa, bophara, matla a robehang, 'mala le bongata. Ho ka se be betere ha o ka romela sampole e nyane bakeng sa rona, haeba o batla ho fumana thepa e tšoanang le ea hau.

4. Nako ea lihlahisoa tsa hau ke efe bakeng sa ho reka ka bongata?

A: Hangata ke matsatsi a 7 ho isa ho a 20, ho latela bongata ba hau, re ts'episa ho fana ka nako.

5. Ho thoe'ng ka ho phutheloa ha thepa?

A: Sephutheloana se tloaelehileng ke sephutheloana se nang le mokotla o lohiloeng, ebe ka lebokoseng. Haeba u hloka sephutheloana se khethehileng, ka kopo u ntsebise.

6. Ke lokela ho etsa tefo joang?

A: 40% ka T / T le tekanyo ea 60% pele ho pepa.

Ikopanye

Rope e Akaretsang e tiileng e Lokiloeng Kakaretso ea 12mm Bakeng sa Lebenkele la Hardware